Etalon Engineering Run 2015Jun: Difference between revisions

From Monnier Group Research Wiki
Jump to navigationJump to search
← Older editNewer edit →
Monnier (talk | contribs)
0 edits
No edit summary
Monnier (talk | contribs)
0 edits
No edit summary
Line 59: Line 59:


I calculated the separatino of Kappa Peg and we have  seo 183.24650 mas and  100.11146 deg
I calculated the separatino of Kappa Peg and we have  seo 183.24650 mas and  100.11146 deg
v819 her (H 3.8) is a bit faint. we can sometimes see the fringes.
we are collecting great data!! 
good setting during average seeing 8.5cm:  '''coherent coadds 30, ps coadd 3.'''
we keep losing stars near zenith hole. remember to take shutters for gam lyr BEFORE 1:30am.




Revision as of 08:32, 25 June 2015

Notes from etalon run

2015Jun23 (calendar)

Beam 6 was giving us problems.. A highly comatic image. we adjusted the pickoff tip/tilt and the z-position to optimize the flux (increase x2) We now have an excellent image FWHM 7.1 and no coma, although fluxes are still low by x2 compared to best other ones... not sure why.

luminous mounts 6: x,y,z and ealing 56320, 98990, 89053, 60000 compared to original position: 61060, 60750,89153, 87750.

we expect teh RETRO fringes to now be in a different place compared to last time and yesterday.

now we will move to the grism mode.

so we setup camera based on last run: So we had to the 'flip quadrant function.' setup was: 48 252 100 2 4 500 500 which gave frame times of 13ms (Ok)

next we move prism out of the way -- from 505213 -> 0

next talking to filterwheels. turn on mirc and champ filterwheel power from APC webpages.

run script: wolverine2:Subversion/MIRC/MIRC6T/scripts/filterwheel.sh (be patient. this takes a while)

SET ConfigName to H_GRISM150 etalon 6,30,0,18,24,12 micron

RETRO POSITIONS: B12, B23, B34, B45, B56 (with W1 B5, W2 B6) 

   5.345, 6.840, 5.243, 6.185, 9.905

ok.. light was perfectly centered in the above software window.

XCHANS shifted: PRISM: 201 213 219 164 188 176 NOW for R150, quad flip: 199 211 217 162 186 174 onsky: 198 211 217 161 RETRO for B5B6 is now 9.9049 (instead of 7.715mm because we shifted the B6 ealing mount by 2.7mm) Now taking fringe data on all pairs, both w/ and w/o etalon. remember to turn tiptilt on for spooler.

taking internal fringe data w/ and w/o etalons.

all done.. we took an extra few hours to do this because the visbeams alignment was poor. we re-optimized that tonight too.

Trying to get on sky. 2am. issues with fiber explorer not receiving proper xchans. after trying many things, we are rebooting mirkwood to see if this might free up a socket problem?

now problem with S1. can't track above 78 degrees! ugh!

We got a decent set on kap peg, although we often tracked when we didn't have the main packet.


2015Jun24 (calendar)

I noticd the PRISM had not fully retracted for last night's data. This means the wavelength calibration might be different than what we find today. I also noticed the xchans are a bit low on the chip (not perfectly aligned with fringes). I will tweak this up tomorrow, but not touch the fringe positions.

First half of night is Nic's to use S1S2, so we are doing a bit of 4T data on v819 Her.

I calculated the separatino of Kappa Peg and we have seo 183.24650 mas and 100.11146 deg

v819 her (H 3.8) is a bit faint. we can sometimes see the fringes.

we are collecting great data!!

good setting during average seeing 8.5cm: coherent coadds 30, ps coadd 3.

we keep losing stars near zenith hole. remember to take shutters for gam lyr BEFORE 1:30am.


Retrieved from "https://monnier.astro.lsa.umich.edu/research/index.php?title=Etalon_Engineering_Run_2015Jun&oldid=3338"