CHAMP:Alignment procedure: Difference between revisions
| Line 4: | Line 4: | ||
1.) Turn on the CHAMP alignment laser<br> | 1.) Turn on the CHAMP alignment laser<br> | ||
2.) Align each beam on R1 target<br> | 2.) Align each beam on R1 target<br> | ||
3.) Align on L1 | 3.) Align on L1<br> | ||
4.) Put blocker on R1 (using L1/L2-target), so you don't see two spots | 4.) Put blocker on R1 (using L1/L2-target), so you don't see two spots<br> | ||
5.) Align on R2 | 5.) Align on R2<br> | ||
6.) Put blocker on L1 (using the R1/2-target) | 6.) Put blocker on L1 (using the R1/2-target)<br> | ||
7.) Align on target L2 | 7.) Align on target L2<br> | ||
8.) Take out blocker on L2 for alignment of Towers of Power | 8.) Take out blocker on L2 for alignment of Towers of Power<br> | ||
9.) Align L1-L6 mirrors on Towers of Power | 9.) Align L1-L6 mirrors on Towers of Power<br> | ||
10.) Put blocker on R1 (using R1/R2-target) | 10.) Put blocker on R1 (using R1/R2-target)<br> | ||
11.) Put blocker on Towers of Power 3-4 | 11.) Put blocker on Towers of Power 3-4<br> | ||
12.) Align Towers of Power 1-2 (R1-R6) | 12.) Align Towers of Power 1-2 (R1-R6)<br> | ||
13.) Put blocker on Towers of Power 1-2 | 13.) Put blocker on Towers of Power 1-2<br> | ||
14.) Align Towers of Power 3-4 (L1-L6) | 14.) Align Towers of Power 3-4 (L1-L6)<br> | ||
15.) Put blocker on L1 target | 15.) Put blocker on L1 target<br> | ||
16.) Align beam splitter on Tower of Power 1-2 | 16.) Align beam splitter on Tower of Power 1-2<br> | ||
17.) Put blocker on R1 target in order to check alignment on Tower of Power 3-4 | 17.) Put blocker on R1 target in order to check alignment on Tower of Power 3-4<br> | ||
18.) Turn off the alignment laser | 18.) Turn off the alignment laser<br> | ||
Revision as of 23:47, 7 June 2010
CHAMP alignment procedure
=============
1.) Turn on the CHAMP alignment laser
2.) Align each beam on R1 target
3.) Align on L1
4.) Put blocker on R1 (using L1/L2-target), so you don't see two spots
5.) Align on R2
6.) Put blocker on L1 (using the R1/2-target)
7.) Align on target L2
8.) Take out blocker on L2 for alignment of Towers of Power
9.) Align L1-L6 mirrors on Towers of Power
10.) Put blocker on R1 (using R1/R2-target)
11.) Put blocker on Towers of Power 3-4
12.) Align Towers of Power 1-2 (R1-R6)
13.) Put blocker on Towers of Power 1-2
14.) Align Towers of Power 3-4 (L1-L6)
15.) Put blocker on L1 target
16.) Align beam splitter on Tower of Power 1-2
17.) Put blocker on R1 target in order to check alignment on Tower of Power 3-4
18.) Turn off the alignment laser
