CHAMP:Alignment procedure: Difference between revisions
New page: CHAMP alignment procedure ========================= 1.) Turn on the CHAMP alignment laser 2.) Align each beam on R1 target 3.) Align on L1 4.) Put blocker on R1 (using L1/L2-target), so y... |
|||
| Line 2: | Line 2: | ||
========================= | ========================= | ||
1.) Turn on the CHAMP alignment laser | 1.) Turn on the CHAMP alignment laser\\ | ||
2.) Align each beam on R1 target | 2.) Align each beam on R1 target\\ | ||
3.) Align on L1 | 3.) Align on L1 | ||
4.) Put blocker on R1 (using L1/L2-target), so you don't see two spots | 4.) Put blocker on R1 (using L1/L2-target), so you don't see two spots | ||
Revision as of 23:45, 7 June 2010
CHAMP alignment procedure
=============
1.) Turn on the CHAMP alignment laser\\ 2.) Align each beam on R1 target\\ 3.) Align on L1 4.) Put blocker on R1 (using L1/L2-target), so you don't see two spots 5.) Align on R2 6.) Put blocker on L1 (using the R1/2-target) 7.) Align on target L2 8.) Take out blocker on L2 for alignment of Towers of Power 9.) Align L1-L6 mirrors on Towers of Power 10.) Put blocker on R1 (using R1/R2-target) 11.) Put blocker on Towers of Power 3-4 12.) Align Towers of Power 1-2 (R1-R6) 13.) Put blocker on Towers of Power 1-2 14.) Align Towers of Power 3-4 (L1-L6) 15.) Put blocker on L1 target 16.) Align beam splitter on Tower of Power 1-2 17.) Put blocker on R1 target in order to check alignment on Tower of Power 3-4 18.) Turn off the alignment laser
