2012-06-28 (UT)
===========

Program: CL4 (YSO Imaging, PI: Millan-Gabet et al.)

Observers: Rafael, Chris

beam 1 2 3 = E1 E2(REF) S1 / POPs 135
beam 1 2 3 = W1 W2(REF) S2 / POPs 255

start with beam 1 2 3 = E1 E2(REF) S1 / POPs 135

clear

UT 03:40 = 20:40 local 
NIRO align hd135742
fringe offsets +6um / +2000um

NIRO NONDEST 1000Hz MEDSCAN 1/2aperture

04:20 cal1 = hd159743
offsets: 940um / 2300um
counts: 40 / 60 / 30

good seeing

low elevation ~20deg

04:30 target 1 = mwc275 = hd163296
1250um / ?? - E1E2 fringe surprisingly small...
70 / 70 / 40 - low flux pixel

repeat NIRO align

much better flux balance
much better E1E2 fringe
saw the E2S1 fringe but tiny...

2 files saved on target
might improve as elevation comes up...

04:52 hd159743
this cal requires NIRO re-align due to diff in dec, use other cal next
675um / 2200um
60 / 70 / 50

05:00 cal2 = hd163955
1025um / 2250um

05:12 mwc275
816um / 1950um
40 / 40 / 60 - less flux than earlier??
E1E2 clear fringe
E2S1 low SNR maybe there sometimes?
saving data

took out aperture to check fringe SNR: better and no saturation due to low elevation

close bracket before changing

?? hd163955

open apertures
NIRO align

05:30 hd163955
782um / 2288um
70 / 90 / 70

05:40 mwc275
635um / 2250um
all 3 fringes visible now, but of course low SNR on long baselines

05:56 hd163955

06:00 mwc275
now saturating ocasionally since elevation is higher...

06:19 cal3 = hd170622

move on to next target2 = v1295aql = hd190073

NIRO NONDEST 750Hz MEDSCAN

06:28 NIRO align hd188512
wait a bit for delay...

06:54 hd188512
can't find the long baselines fringes, maybe this checkstar is resolved...

06:59 cal1 = hd188385
NIRO align
87um / 2355um

07:10 v1295aql
77um / 2316um
50 / 50 / 50
all 3 fringes clear SNR

07:30 hd188385
-68um / 2250um

07:40 took another calibrator sequence by mistake...

07:50 v1295aql
-98um / 2324um
50 / 50 / 50
looked at SHORTSCAN data, doesn't improve much fringe overlap and 31 fringe packet partially outside scan..
continue taking data in MEDSCAN

08:05 hd188385

08:15 v1295aql
-162um / 2240um

08:30 hd188385
-176um / 2250um

move to another target3 = mwc614 = hd179218

NIRO align on some bright star

NIRO NONDEST 750Hz MEDSCAN

08:40 cal1 = hd177305
-13um / 2240um
40 / 40 / 40

08:50 mwc614
-36um / 2200um
60 / 60 / 60

?? hd177305

09:15 mwc614
-19um / 2188um
60 / 60 / 60

09:25 hd177305

09:35 mwc614
-46um / 2146um
50 / 50 / 50

09:50 hd177305

go back to target2 = v1295aql = hd190073

NIRO align

NIRO NONDEST 750Hz MEDSCAN

10:05 hd188385 or was it hd189509?
-99um / 2130um

10:15 v1295aql
-68um / 2172um

10:30 hd189509

10:37 v1295aql

10:49 hd189509

11:05 v1295aql

11:30 hd189509

done.

---
Summary:

E1E2S1

mwc275: 5 brackets (2 cleanest w. 3 fringes)
v1295 Aql: 4 brackets pre-transit
mwc614: 3 brackets
v1295 Aql: 3 brackets post-transit

---